מגבר 4X5000W עם פרוססור מובנה וחיבור דנטה Martin Audio IK42 DANTEl

Martin Audio IK42-DANTE Specifications:

General

Type: Four-channel Class D amplifier

Power Output:

5000W into 2Ω

3000W into 4Ω

1500W into 8Ω

10000W bridged per channel pair, 4Ω

CV Line Output:

1250W, 25V line

3500W, 70V line

5000W, 100V line

Digital Signal Processing: 96kHz/48kHz DSP on all inputs and outputs

Cooling: Dual vari-speed fans, front-to-back airflow

Maximum Ambient Temperature: 40°C (104°F)

Audio Inputs/Outputs

Analogue In/Link (4 channels):

4 x female

4 x male Neutrik™ XLR

Analogue Input Impedance: 20kΩ balanced to ground

Maximum Analogue Input Level: +20dBu

AES3 In/Link (2 channels): 1 x female, 1 x male Neutrik™ XLR, balanced

Dante™ (4 channels): 2 x shielded RJ45, primary and secondary

Amplifier Outputs: 4 x Neutrik Speakon™ NL4

Audio Performance

Dynamic Range:

> 113dBA, analogue input

> 114dBA AES/Dante™ input

Frequency Response: 7Hz-30kHz (‐2.5dB points, 4Ω load)

Total Harmonic Distortion: < 0.05% typical @ 1kHz, 4Ω load

Slew Rate: > 60V per microsecond

Damping Factor: > 800 at amplifier output, ref 8Ω

Control and Monitoring Network

Protocol: Ethernet

Control Application: Martin Audio VU-NET™

Digital Signal Processing

Drive Module Input DSP:

Input signal routing, delay, gain, HPF, Phase, Mute

EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters

Drive Module Output DSP:

Source, delay, gain, Phase, Mute, crossover filters, limiters

EQ: low shelf, 8 x PEQ / band pass and shelving filters

Physical Inputs:

4 x analogue

2 x AES

4 x Dante™ inputs routable to four DSP drive modules

Sample Rate: 96kHz (48kHz for FIR filter implementation)

Power Supply

Type: High performance Series Resonant

AC Input Operating Range: 85 – 240V ~ AC, 47 – 63Hz

Mains Inrush Current: 6A at 115V, 12A at 230V (max for

Mains Connector: Neutrik 32A Powercon™

Physical

Dimensions (WxHxD): 18.98″ x 3.46″ (2U) x 17.35″ (482 x 88 x 441 mm)

Weight: 12.5 kg